puzzle Parking System

Multilevel car parking system

1/1

Automated Multilevel Car Parking System

Simple Parking System

Rotary Car Parking System

Puzzle Parking System

This Automated Mechanical Parking System can cater for as little as 10 Cars/SUV's with an unlimited maximum number of vehicles capable of being parked.

Multi-Floor Parking System reduces to a minimum the amount of space required to park each vehicle and has an average retrieval time of less than two minutes.

It operates with the driver parking and leaving the vehicle in the parking bay at the entrance level. Once the driver leaves the safety zone incorporated into the parking bay, the system automatically parks the vehicle in its determined parking place.

The movement of the car is achieved by use of a lift (a maximum of 70 cars per lift is recommended) to bring the vehicle to the required floor level and thereafter by a cart to its parking bay.

The quick parking and retrieval times of the system is achieved by the use of carts for horizontal movement of the vehicles at each parking level. The use of a PIN code or Parking ticket identifies the vehicle position within the system, for its efficient retrieval

Advantages :

Parking and retrieval of the parked vehicle is quick, safe and reliable.
The parking of SUV's and other such vehicles can be accommodated.
This system is suitable for use for parking within buildings at both above and below ground level.
Office, Residential, Commercial Parking, Park and Ride and other such like facilities in both above and below ground applications use Multi-Floor Automated Parking Systems.
The operation of the system is overseen and reliably governed by computers.
An engineered safety zone, together with multiple safety equipment guarantees its safe operation.
The space required per vehicle is minimised as no ramps are required.
The system is bespoke designed to meet the space available and maximise the parking capacity.
Minimal ventilation and lighting required in the parking area.
The cost per parking space is low.
This system is suitable for both public and private use.
Maintenance costs are minimised.
The Multi-Floor system is tried, tested, well proven and very reliable with a large number of reference sites available

Simple car Parking System

1. Two Post Type

The BTP-PJS simple parking system (two post type) has the advantages of

1、Flexible to various places, saving land;

2、The core of the device lays inside with good stability performance;

3、Multiple mechanical and electric safety structure design, high security;

4、Transmission parts and wiring are located inside the equipment, no exposed, high safety performance;

5、The noise of the equipment operation is low, no worry for disturbing;

6、Not influenced by the climate, flexible to various conditions;

7、Easy install, beautiful appearance;

8、Suitable for family and commercial parking purposes, especially for limited small spaces.

2.Four Post Type

The BTP-PJS simple parking system (four post type) has the advantages of

1、Flexible to various places, saving land;

2、Multiple mechanical and electric safety structure design, high security;

3、Transmission parts and wiring are located inside the equipment, no exposed, high safety performance;

4、The noise of the equipment operation is low, no worry for disturbing;

5、Not influenced by the climate, flexible to various conditions;

6、Easy install, beautiful appearance;

7、Suitable for family and commercial parking purposes, especially for limited small spaces.

Note: for the BTP-PJS four post parking system, customized service is available. Now its lifting capacity can be designed up to 16 tons

3. Stacking Type

Note:

1、The BTP-PJS simple parking system (stacking type) is calculated by unit;

2、One unit is with four vertical parking spaces, which cannot be split;

3、Multi-unit can be built in a row.

4. Pit Type

The BTP-PJS simple parking system (pit type) has the advantages of

1、Taking full use of underground space, saving ground space, increasing parking spaces; descending by its own weight, saving energy

2、Faster and stable running, lower noise; computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal

3、Higher safety, equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device, etc.

The BTP-PSH puzzle parking system (2-15 levels) has the advantages of

1、Can be built up to 15 levels high with multi-rows, higher space use ratio

2、Faster and stable running, lower noise; computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal

3、Higher safety, equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device, etc.

The BTP-PSH puzzle parking system (2-15 levels) is designed with multi-levels and multi-rows. Each level is designed with an empty space for exchanging. All spaces can be lifted automatically except the spaces of ground level and all the spaces can be slide automatically except the spaces of top level.

When a car needs parking or retrieving from one parking space, all parking spaces under this car space will slide to the empty space and form a lifting passage under this space. Then, this parking space can be lifted up and down freely. When it reaches the ground level, the car can be parked or retrieved directly.

Vertical Rotary Car Parking System

The BTP-PCS vertical rotary parking system has the advantages of

1、Adopting the Rubik’s cube technique, saving land;

2、Small land coverage, flexible equipment, high space utilization ratio;

3、Low cost of fire control, external package, and civil engineering base;

4、Brief structure, package available, good-looking appearance, permeability good, and coordination with the surrounding landscape.

The BTP-PCS vertical rotary parking system consists of one automated mechanical system, which rotates at an angle of being perpendicular to the ground. It is driven by the motor+chain+chain wheel and runs in a rotating way. When one wants to park or retrieve vehicle, the needed parking pallet will be rotated to the ground level. Then the vehicle can be parked or retrieved directly.

Automated Parking system

1. Stacking Parking system

The BTP-PXD Stacking Parking System has the advantages of

1、 High automation degree, high parking efficiency, saving space, flexible design, various structures, simple operation and easy control;

2、 Can realize large number’s parking that is hundreds or thousands of vehicles’ parking. And it is totally enclosed designed, with high safety for car parking and retrieving.

The BTP-PXD stacking parking system is a totally automatic parking system. Car parking and retrieving are performed automatically. Each parking system is equipped with one stacker, which can slides on the track.

Meanwhile, the stacker is equipped with one lifting platform. Vehicle just needs to be parked on the exit and entrance. Then the stacker or bridge crane carries the vehicle to its ordered parking space by horizontally and vertically moving. Vehicles’ orderly parking or retrieving will be performed by the parking or retrieving device.

2. Vertical Lifting Parking System

The BTP-PCS Vertical Lifting Parking System--Tower Parking System (10-35 Levels) has the advantages of:

1、 Can be designed with hydraulic drive or traction motor drive. The lifting speed of traction motor drive can be up to 120m/min and the lifting speed of hydraulic drive can be up to 60m/min;

2、 Equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device;

3、Its operation mode can be manual button operation or swiping card;

4、With higher space use ratio, more flexible than previous vertical lifting type parking equipment;

5、Can be designed with levels no higher than 35 levels and its parking capacity can be customized;

6、 With the characteristics of higher safety, lower cost and maintenance cost. computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal;

7、The equipment is processed by galvanizing and high-grade anti-corrosion painting;

8、 According to customers’ different demands, its outside packing can be designed as totally enclosed packing, semi-enclosed packing, simple packing, and non-packing.

The BTP-PCS Vertical Lifting Parking System/Tower Parking System (10-35 Levels) operates in following ways:

1、 Car parking process: firstly rotating table rotates to station, and then lifter lowers down. The driver drives the car in and gets out to the operation panel to park the car by swiping card or manual button operation. Then lifer lifts the car up to a bit higher position than the ordered level, the comb parking pallet slides to the lifting passage way, lifer descends the car on the comb parking pallet, and comb parking pallet moves the car to ordered parking space. Then lifter descends down for another car parking or retrieving.

2、 Car retrieving process: comb parking pallet slides the car to the lifting passage way, lifer goes up and lifts the car on the comb lifter, comb parking pallet slides to its previous position, lifter descends the car on the ground rotating table, rotating table rotates to change the car’s direction, then the operator drives the car out.

3. Horizontal Shifting Parking System

The BTP-PPY horizontal shifting parking system has the advantages of:

1、High accuracy control, high speed silent running, large compact design, high integration with its surrounding buildings;

2、 According to the conditions of its surrounding buildings and environment, this parking equipment can adapt to various system integration, maximum to meet customer demand.

3、 This equipment is with features of high safety, high automation degree, high efficiency of car parking and retrieving, high ratio of space use, and widely applied.

The BTP-PPY horizontal shifting parking system’s car lifting equipment is mainly composed by special car elevator, car rotating table, carrier, safe protection devices and electric control system. According to the carrier’s difference, it can be divided into pull plate type, comb type, and clamping tire type.

Car parking process: firstly car driven in the parking equipment, then rotating table rotates to change its direction and make the car park on the lifting platform. After that, the lifting platform descends the car to its ordered parking level. Then the intelligent carrier carries the car from lifting platform to carrying trolley.

Automated Multilevel Car Parking System

This Automated Mechanical Parking System can cater for as little as 10 Cars/SUV's with an unlimited maximum number of vehicles capable of being parked.

Multi-Floor Parking System reduces to a minimum the amount of space required to park each vehicle and has an average retrieval time of less than two minutes.

It operates with the driver parking and leaving the vehicle in the parking bay at the entrance level. Once the driver leaves the safety zone incorporated into the parking bay, the system automatically parks the vehicle in its determined parking place.

The movement of the car is achieved by use of a lift (a maximum of 70 cars per lift is recommended) to bring the vehicle to the required floor level and thereafter by a cart to its parking bay.

The quick parking and retrieval times of the system is achieved by the use of carts for horizontal movement of the vehicles at each parking level. The use of a PIN code or Parking ticket identifies the vehicle position within the system, for its efficient retrieval

​

Advantages :

​

Parking and retrieval of the parked vehicle is quick, safe and reliable.

The parking of SUV's and other such vehicles can be accommodated.

This system is suitable for use for parking within buildings at both above and below ground level.

Office, Residential, Commercial Parking, Park and Ride and other such like facilities in both above and below ground applications use Multi-Floor Automated Parking Systems.

The operation of the system is overseen and reliably governed by computers.

An engineered safety zone, together with multiple safety equipment guarantees its safe operation.

The space required per vehicle is minimised as no ramps are required.

The system is bespoke designed to meet the space available and maximise the parking capacity.

Minimal ventilation and lighting required in the parking area.

The cost per parking space is low.

This system is suitable for both public and private use.

Maintenance costs are minimised.

The Multi-Floor system is tried, tested, well proven and very reliable with a large number of reference sites available

Simple car Parking System

1. Two Post Type

The BTP-PJS simple parking system (two post type) has the advantages of

1、Flexible to various places, saving land;

2、The core of the device lays inside with good stability performance;

3、Multiple mechanical and electric safety structure design, high security;

4、Transmission parts and wiring are located inside the equipment, no exposed, high safety performance;

5、The noise of the equipment operation is low, no worry for disturbing;

6、Not influenced by the climate, flexible to various conditions;

7、Easy install, beautiful appearance;

8、Suitable for family and commercial parking purposes, especially for limited small spaces.

2.Four Post Type

The BTP-PJS simple parking system (four post type) has the advantages of

1、Flexible to various places, saving land;

2、Multiple mechanical and electric safety structure design, high security;

3、Transmission parts and wiring are located inside the equipment, no exposed, high safety performance;

4、The noise of the equipment operation is low, no worry for disturbing;

5、Not influenced by the climate, flexible to various conditions;

6、Easy install, beautiful appearance;

7、Suitable for family and commercial parking purposes, especially for limited small spaces.

Note: for the BTP-PJS four post parking system, customized service is available. Now its lifting capacity can be designed up to 16 tons

3. Stacking Type

Note:

1、The BTP-PJS simple parking system (stacking type) is calculated by unit;

2、One unit is with four vertical parking spaces, which cannot be split;

3、Multi-unit can be built in a row.

4. Pit Type

The BTP-PJS simple parking system (pit type) has the advantages of

1、Taking full use of underground space, saving ground space, increasing parking spaces; descending by its own weight, saving energy

2、Faster and stable running, lower noise; computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal

3、Higher safety, equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device, etc.

Puzzle Parking System

The BTP-PSH puzzle parking system (2-15 levels) has the advantages of

1、Can be built up to 15 levels high with multi-rows, higher space use ratio

2、Faster and stable running, lower noise; computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal

3、Higher safety, equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device, etc.

​

Vertical Rotary Car Parking System

The BTP-PCS vertical rotary parking system has the advantages of

1、Adopting the Rubik’s cube technique, saving land;

2、Small land coverage, flexible equipment, high space utilization ratio;

3、Low cost of fire control, external package, and civil engineering base;

4、Brief structure, package available, good-looking appearance, permeability good, and coordination with the surrounding landscape.

​

Automated Parking system

1. Stacking Parking system

The BTP-PXD Stacking Parking System has the advantages of

1、 High automation degree, high parking efficiency, saving space, flexible design, various structures, simple operation and easy control;

2、 Can realize large number’s parking that is hundreds or thousands of vehicles’ parking. And it is totally enclosed designed, with high safety for car parking and retrieving.

The BTP-PXD stacking parking system is a totally automatic parking system. Car parking and retrieving are performed automatically. Each parking system is equipped with one stacker, which can slides on the track.

2. Vertical Lifting Parking System

The BTP-PCS Vertical Lifting Parking System--Tower Parking System (10-35 Levels) has the advantages of:

1、 Can be designed with hydraulic drive or traction motor drive. The lifting speed of traction motor drive can be up to 120m/min and the lifting speed of hydraulic drive can be up to 60m/min;

2、 Equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device;

3、Its operation mode can be manual button operation or swiping card;

4、With higher space use ratio, more flexible than previous vertical lifting type parking equipment;

5、Can be designed with levels no higher than 35 levels and its parking capacity can be customized;

6、 With the characteristics of higher safety, lower cost and maintenance cost. computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal;